47mm x 75mm x 2.4m Kiln Dried Regularised Sawn Treated Timber
47mm x 75mm x 2.4m Kiln Dried Regularised Sawn Treated Timber
- Product Code: U1619
- Delivery Time: 1 - 2 days
- Brand: Various
- Model and Size: STR_47mm x 75mm x 2.4m
Brand: Various
Model and Size: 3.5x65mm - coarse point
Delivery Time: 1 - 2 days
Properties
Fixing plasterboard to timber and timber studs
Sharp point penetrates effectively
Bugle head countersinks without tearing the paper layer
Coarse threads provide strong holding power..
£31.42
£37.70 inc VAT
Brand: Various
Model and Size: STT_22mm x 150mm x 4.8m
Delivery Time: 1 - 2 days
Sawn Treated Timber is a high quality treated sawn timber for general construction usesPropertiesHigh Pressure treated with Tanalith 'E' (or similar)All cut ends must be re-sealed with a proprietary treatmentAdditional lengths may be available - please contact us..
Brand: Various
Model and Size: KDST_47mm x 200mm x 4.2m
Delivery Time: 1 - 2 days
4.2m Kiln Dried Regularised Sawn Treated Timber C24, regularised with eased corners for comfortable handling. Finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesStrength graded to C24 for known structural performanceAll cut ends must be re-sealed with a proprietary treatmentTongu..
Brand: Various
Model and Size: 19mm x 75mm
Delivery Time: 1 - 2 days
Skirting Board Timber Bullnosed Standard is manufactured from high quality Scandinavian 5ths quality redwood (pine). Sizes stated are Nominal, finished sizes are approx 5-6mm smaller.PropertiesResponsibly Sourced SoftwoodAlso Available Low Pressure Preservative TreatedAlso Available PrimedFinished D..
Brand: Various
Model and Size: STR_47mm x 125mm x 4.8m
Delivery Time: 1 - 2 days
4.8m Kiln Dried Regularised Sawn Treated Timber C24, regularised with eased corners for comfortable handling. Finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesStrength graded to C24 for known structural performanceAll cut ends must be re-sealed with a proprietary treatmentTongu..
Brand: Various
Model and Size: 4.2x13mm - for thinner gauge steel
Delivery Time: 1 - 2 days
Small screws with wafer head and drill point used for thinner gauge steelPropertiesInstalled flushScrew spacing 250mm..