Setcrete Latex Floor Levelling Compound 20kg

Setcrete Latex Floor Levelling Compound 20kg
Setcrete Latex Floor Levelling Compound 20kg
  • Product Code: U1688
  • Delivery Time: 1 - 2 days
  • Brand: Various
  • Model and Size: 20kg
  • Weight: 20.00kg
Request product details

Setcrete Latex Floor Levelling Compound 20kg

Setcrete™ Latex is a floor levelling compound for use in light to medium traffic internal areas prior to the installation of new floorcoverings. It is suitable for use over a wide range of absorbent and non-absorbent subfloor types providing they are sound, well adhered, and suitably prepared.
  • An easy to use floor levelling compound – just add water in correct quantity as directed, mixing with a suitable Mixing Paddle and Drill for a minimum of 2 minutes
  • Setcrete Latex is self-smoothing and can be applied at thicknesses between 2-10mm
  • Drying is dependent upon the absorbency of the sub floor, ambient temperature, and humidity. However, after 2 hours it should be hard enough for you to walk on
  • Before applying a floor covering, Setcrete Latex should be left uncovered for 24 hours when applied at 2-5mm thickness. For more than 5mm it should be left for 48 hours
  • Setcrete Latex is suitable to use over a wide range of absorbent sub floors which should first be coated with Setcrete Acrylic Primer diluted in a ratio of 1-part primer to 4 parts water.
  • For non-absorbent sub floors, the surface should first be primed with un-diluted Setcrete Acrylic Primer to promote adhesion
  • The working time for use is approximately 15 - 20 minutes at 20°C, depending upon the sub floor absorbency, ambient temperature, and humidity. Do not mix more than one bag at a time
  • For further information and technical advice regarding the use of Setcrete Latex, please email the Technical Services Department - contact@setcrete.co.uk
24 x 2440 x 1220mm Spruce Plywood 111/111 EXT
Brand: Various Model and Size: 24 x 2440 x 1220mm
Delivery Time: 1 - 2 days
24 x 2440 x 1220mm Spruce Plywood 111/111 EXT
Spruce Plywood is an ideal product for both interior and exterior construction work where strength and durability is required. Spruce plywood is manufactured from long-grained, homogenous Nordic conifer with straight fibres. Spruce Plywood panels are lightweight and easy to work with making them eas..
Aluminium Base Track 120mm
Brand: Various Model and Size: 90812 - Free Delivery
Delivery Time: 2 - 3 Days
Aluminium Base Track 120mm
An aluminium base track for external insulation systems.PropertiesBox shapedThermal insulation boardCan be powder coated to any RAL colour..
50mm x 100mm x 4.8m CLS Profile Kiln Dried Studwork Timber (Fin Size 38mm x 89mm x 4.8m)
Brand: Various Model and Size: 50mm x 100mm x 4.8m
Delivery Time: 1 - 2 days
50mm x 100mm x 4.8m CLS Profile Kiln Dried Studwork Timber (Fin Size 38mm x 89mm x 4.8m)
Planed and finished with eased edged to precise tolerances for accurate studwork and framingManufactured from high quality imported Whitewood (Spruce)Regularised (consistent dimensions) by planing all round with 'eased' (rounded) corners for comfortable handlingIdeal for interior framing and carcass..
14.5mm x 119mm Redwood Tongue and Grooved V Jointed Matchboard Standard
Brand: Various Model and Size: 14.5mm x 119mm
Delivery Time: 1 - 2 days
14.5mm x 119mm Redwood Tongue and Grooved V Jointed Matchboard Standard
Redwood Tongue and Grooved V Jointed Matchboard Standard is a high quality smooth Tongue and grove cladding board with a V joint which gives an attractive pleasing finish. It can be stained, painted or varnished.PropertiesResponsibly Sourced RedwoodsMany Other Patterns And Sizes Available To OrderAl..
Sawn Treated Carcassing Timber C16 - 47mm x 175mm (FIN SIZE 45mm x 170mm)
Brand: Various Model and Size: 47mm x 175mm
Delivery Time: 1 - 2 days
Sawn Treated Carcassing Timber C16 - 47mm x 175mm (FIN SIZE 45mm x 170mm)
Sawn Treated Carcassing Timber is high pressure treated with Tanalith ‘E’ (or similar) to enhance resistance to water and damp. Each piece is kiln dried to help improve stability, strength, durability and straightness, making it suitable for use in many construction projects such as stud partitions,..
18mm x 94mm x 4.4m MDF Painted Truprofile Pencil/Chamfered Round Skirting
Brand: Various Model and Size: 18mm x 94mm x 4.4m
Delivery Time: 1 - 2 days
18mm x 94mm x 4.4m MDF Painted Truprofile Pencil/Chamfered Round Skirting
Truprofile Pencil/Chamfered Round Skirting is an MDF Moulding with a superior prime coating needing minimal finishing, saving both time and moneyPropertiesManufactured In The UKFree from defects such as shakes, knots and resinsManufactured from Moisture Resistant MDFEasy To Handle LengthsPrimed All ..