Owatrol Prepdeck – 3in1 Stripper, Cleaner, Millglaze Remover

Prepdeck - reduces the layer of glaze, removes dirt, tears

PREPDECK is a water-based, multifunctional, professional product. With its help, we will get rid of any coatings from the surface of the wood, e.g. stains and acrylic paints. In addition, it removes glaze produced in the treatment of new wood very well. Undiluted - opens the pores of hardwoods, thus facilitating the penetration of penetrating agents in the further finishing process.

By diluting with water - the PREPDECK becomes a powerful basic cleaning agent, removing stains and dirt. Recommended for facades, terraces and garden furniture.

PROPERTIES:

• For exterior wood
• It removes all finishing layers, including acrylic
• As a solution for dirt
• Improves the penetration of protective layers into new wood
• Reduces glaze
• For vertical and horizontal elements
• For softwood, pressure impregnated and thermo-wood species
• Hard wood, excluding oak, walnut, cedar and marquetry

Before applying

Surfaces must be clean, dry, and old flaking coatings and fungal outbreaks must be removed. Secure adjacent elements in the vicinity of works and vegetation. We recommend that you perform the test in an inconspicuous place and use protective clothing and safety recommendations.

IMPORTANT:

1. When using PREPDECK, do not let it dry out, sprinkle it with water mist from the sprayer

2. We must neutralize with Owatrol Net-Trol neutralizer. If the wood is not neutralized, it will darken and will not accept the preservative.

Familiarize yourself with the Technical Data Sheet explaining the procedure in each type of work

- Removal of e.g. stains and cleaning

- Reducing the glaze

- Washing stains and stubborn dirt

- Contact us if you plan to work on oak or walnut

When using PREPDECK, we prevent it from drying out, sprinkle it with water mist from the sprayer and neutralize it with Owatrol Net-Trol neutralizer. If the wood is not neutralized, it will darken and will not accept the preservative.

The exception is TROPITECH "all in one". In this case, ALWAYS use a 1: 3 dilution of water with household bleach to lighten the wood.

HOW TO USE

1. Mix before use

2. The direction of work from the bottom up, selected batches, which we will make up to 15-30 minutes

A) to wash off coatings and markings - do not dilute

B) to reduce glaze after processing - mix PREPDECK with water 1: 4, for Ipe the proportion 1: 1

C) cleaning - mix PREPDECK with water in the proportion 1: 5 - for these works the maximum recommended dilution is 1:20

3. After using PREPDECK, after rinsing with water, it MUST be neutralized with NET-TROL

4. We wait 2-3 days for the next works to be fully dry.

PERFORMANCE:

Concentrate: 3-4 m2 / l

Dilution:

1: 1 8 m2 / l

1: 4 16 m2 / l

1:10 to 40 m2 / l

TEMPERATURE: Use between + 5 ° C and + 35 ° C.

TOOLS: Synthetic bristle brush, roller, nylon brush, garden sprayer

* Dangerous - follow the safety recommendations.