Owatrol AQUANETT agent for removing old coatings

OWATROL AQUANETT An agent for removing old oil coatings from wood surfaces, discolored due to the action of UV rays. Takes off old, damaged linseed and teak oil. It copes very well with stains and stains after corrosion, with changes from mold outbreaks and those caused by weather conditions. It does not contain solvents and paraffin, it is fully biodegradable. We use the original form, the gel formula - we do not create solutions. By its action, AQUANETT makes the oil dissolve in water. Recommended as the first step before using oiling preparations such as DEKS D1 or TEXTROL. After using AQUANETT, we obtain the original color of wooden surfaces, and apply them to elements and places that are or are used outdoors, such as terraces, garden furniture and architecture, facades or windows.

Aquanett is a product for removing oils that penetrate the wood, penetrate the wood body and do not form topcoats. Dilunett + Nettrol should be used to remove the oils forming the topcoats.

PROPERTIES

• Recovering the natural beauty of wood
• Eliminating darkening and gray wood colors
• Gentle on matter, does not damage wooden structures
• For native wood species such as pine and larch
• For exotic species: IROKO, BANGKIRAI, GARAPA, IPE-LAPACHO
• Perfect before the actual renovation
• Gives oil layers water-soluble properties
• Ecological,
• Odorless

Before applying:

it is recommended to perform a functional test in an inconspicuous place. Use rubber gloves to protect yourself at work, and after using AQUANETT WE ALWAYS ENSURE NET-TROL

HOW TO USE:

• NO DRAINING
• Before starting the application, mix the agent very well and shake it
• Try to apply over the entire planned surface
• Act from top to bottom when working on vertical elements
• The operating time is 5 minutes NO LONGER
• Rinse thoroughly with water - for a better effect, you can pressurize, and warm water will improve the work
• Neutralize the TROL with NET-TROL
• TEMPERATURE: Use in the range of 0 ° C to + 40 ° C.

EFFICIENCY: from 4m2 / l up to 25m2 / l where practical consumption depends mainly on the type of oil to be removed, the surface and its condition and technique of work

TOOLS: Brush with synthetic bristles, synthetic roller

TOOLS WASH: water