50mm x 150mm Hardwood Timber Sill Section Red Grandis

50mm x 150mm Hardwood Timber Sill Section Red Grandis
50mm x 150mm Hardwood Timber Sill Section Red Grandis
  • Product Code: U1690
  • Delivery Time: 1 - 2 days
  • Brand: Various
  • Model and Size: 50mm x 150mm
Request product details

50mm x 150mm Hardwood Timber Sill Section Red Grandis

Hardwood Timber Sill Section Red Grandis is a medium to fine textured pink hardwood with good machining properties and moderate durability.

Properties

  • Lightweight with straight grain
  • Good strength properties
  • Plantation grown for fewer defects
  • Bespoke cross-cutting service available
  • Range of lengths normally available: 1.8m and longer
  • Finished dimensions will be 5 to 6mm less on the thickness and 5 to 8mm on width smaller than the nominal sizes stated
22mm x 150mm Whitewood Tongue and Grooved Contract Flooring (Finished size 18mm x 144mm)
Brand: Various Model and Size: 22mm x 150mm
Delivery Time: 1 - 2 days
22mm x 150mm Whitewood Tongue and Grooved Contract Flooring (Finished size 18mm x 144mm)
Whitewood Tongue and Grooved Contract Flooring for 'sub floor' application - to accept a finish covering.PropertiesHigh Quality Scandinavian Whitewood (spruce)Responsibly Sourced Softwoods Further Shrinkage May Occur After LayingFinished Dimensions Will Be Smaller Than The Nominal Sizes Stated...
2440mm x 1215mm x 9mm Primed Short Grooved MDF Panel
Brand: Various Model and Size: 2440mm x 1215mm x 9mm
Delivery Time: 1 - 2 days
2440mm x 1215mm x 9mm Primed Short Grooved MDF Panel
Primed Short Grooved MDF Panel is a moisture resistant MDF with machined grooves running along the board producing a great panelling effect.PropertiesProduced from moisture resistant MDFPrimed for easy finishingEasy to handleFor interior use only..
Box of 1000 4.2x13mm Wafer Head Screw with Drill Point for Thinner Gauge Steel
Brand: Various Model and Size: 4.2x13mm - for thinner gauge steel
Delivery Time: 1 - 2 days
Box of 1000 4.2x13mm Wafer Head Screw with Drill Point for Thinner Gauge Steel
Small screws with wafer head and drill point used for thinner gauge steelPropertiesInstalled flushScrew spacing 250mm..
22mm x 150mm x 3.6m Sawn Treated Timber Softwood Carcassing
Brand: Various Model and Size: STT_22mm x 150mm x 3.6m
Delivery Time: 1 - 2 days
22mm x 150mm x 3.6m Sawn Treated Timber Softwood Carcassing
Sawn Treated Timber is a high quality treated sawn timber for general construction usesPropertiesHigh Pressure treated with Tanalith 'E' (or similar)All cut ends must be re-sealed with a proprietary treatmentOther lengths may be available - please contact us..
25 x 244mm X 2.44m MDF Painted Truprofile Window Board
Brand: Various Model and Size: 25 x 244mm X 2.44m
Delivery Time: 1 - 2 days
25 x 244mm X 2.44m MDF Painted Truprofile Window Board
MDF Painted Truprofile Window Board is an MDF Moulding with a superior prime coating which requires minimal finishing, saving both time and money.PropertiesManufactured In The UKNo Shakes, Knots, Resins, or other similar defectsManufactured From Moisture Resistant MDFFully primed on all sides25 x 24..
47mm x 100mm x 3m Kiln Dried Regularised Sawn Timber Treated C16 47mm x 100mm x 3m Kiln Dried Regularised Sawn Timber Treated C16
Brand: Various Model and Size: ST_47mm x 100mm x 3m
Delivery Time: 1 - 2 days
47mm x 100mm x 3m Kiln Dried Regularised Sawn Timber Treated C16
Kiln Dried Regularised Sawn Treated Timber C16 which has been regularised by planing all round with eased corners for comfortable handling. Our regularised carcassing finishes 2mm off nominal thickness and 5mm off nominal width.PropertiesHigh Pressure treated with Tanalith 'E' (or similar)Kiln dried..