Ceresit CT327 Glass-Fibre Armouring Mesh Roll
Ceresit CT327 Glass-Fibre Armouring Mesh Roll
Length: 25000mm
Width: 1000mm
Weight/m2: 0.16kg
Weight: 8.25kg
Roll Length: 25
Mesh size: 6x10
Characteristics
- Alkali-resistant,
- Slip proof,
- Tear proof,
- High impact resistance.
Application
- Embed the glass-fibre mesh vertically into the fresh reinforcing mortar, with overlaps of approx. 10 cm in joint areas, then level the surface.
- Embed the webbing into the upper third of the reinforcing layer, and then cover completely with reinforcing mortar, pushing the mesh into it using a metal trowel.
- Properly applied mesh should not be visible and completely covered in the mortar.
- It is important to keep the mesh overlaps on next applied belts to about 10 cm.
- These overlaps should not coincide with the board joints.
- In the case of openings such as windows the mesh should be sunk further.
- Work should be performed in dry conditions, at temp. of air and the substrate from +5 C to +25 C.
Certification
European Technical Approval (ETA): 13/0086,
Certificate: 1488-CPR-0407/Z
Brand: Ceresit
Model and Size: CT79 1.5mm
Delivery Time: 5 - 7 days More options available
PorpertiesHighly elastic, reinforced with carbon, glass and polyacrylamid fibres combination
Extremely resistant to weather conditions
Extremely resistant to operating damages – Over 100 Joules forceExtremely resistant for thermal stressesReady to useSelf-cleaningHighly dirt resistantVery low wate..
Brand: Ceresit
Model and Size: 1000x500mm - 2.0m2
Delivery Time: 3 - 5 days
PropertiesLightweightEasily cut by knife to any size and shapeHighly resistant to mould growthHighly durableCost effectiveEnvironmentally friendlyUsesNew and existing rendered or unrendered masonryTimber backed walls, roofs, and floorsCavity wall Layered external wallsPlaces likely to develop t..
£36.95
£44.34 inc VAT
Brand: Ceresit
Model and Size: CT74 - 25kg
Delivery Time: 1 - 2 days More options available
Ceresit CT74 Silicone Render is used for making thin-layer plasters on concrete substrates, traditional plasters, gypsum substrates and chipboards, gypsum cardboards, etc. The recommended application of the plaster CT74 is as façade plaster within Ceresit ETICS (External Thermal Insulation Composite..
£69.30
£83.16 inc VAT
Brand: Ceresit
Model and Size: ZU-25kg
Delivery Time: 1 - 2 days
Properties
flexible
durable
good grip
resistant to weather conditions
machine application possible
Uses
External wall insulation fixing
Fixing EPS and XPS polystyrene boards
Making a reinforced protective layer..
£17.60
£21.12 inc VAT
Brand: Ceresit
Model and Size: CT72 1.5mm
Delivery Time: 5 - 7 days More options available
PropertiesHighly vapour permeable and durableResistant to damage and cleaning
Resistant to weather conditions
BioProtect formula – resistant to the development of fungus, algae and mould
Possibility of the machine applicationRange of Ceresit coloursApplicationConcrete substratesTraditional plaste..
Brand: Ceresit
Model and Size: CT60 - 25kg 0.5mm
Delivery Time: 2 - 3 Days More options available
Ceresit CT60 is used for making thin-layer renders in External Wall Insulation Systems, on concrete substrates, on traditional renders, gypsum substrates and chipboards, gypsum cardboards, etc. It is recommended use CT60 as facade render within Ceresit ETICS (External Thermal Insulation Composite Sy..
£89.00
£106.80 inc VAT